Factors Will Affect The Bending Accuracy Of Full-automatic Pipe Bender

How many kinds of pipe benders are there? Why do you want tens of thousands or even hundreds of thousands? What's the difference? In fact, there are only three types of automatic pipe benders, and CNC pipe benders. The automatic pipe benders are purely electric, driven by a motor and driven by a gear chain; The hydraulic pipe bender decomposes the pipe bending action, and uses hydraulic pressure to drive clamping and unclamping, pipe bending, auxiliary advance and auxiliary retreat, core advance and core retreat, etc.

1. Material thickness and roughness

Laser cutting is suitable for cutting thin plates. The effective thickness is carbon steel below 12mm and stainless steel below 6mm. The processed quality is significantly enhanced and the efficiency is guaranteed. If the material < 1mm is cut, the cut will be smooth. Material surface roughness, material surface roughness also determines the cutting quality. Generally, the smoother the material, the better the cutting quality.

2. Working power and mode of NC pipe bender

It has been proved that the higher the power is, the better the effect will be even if the same plate is cut. Laser cutting mode and material have a certain degree of fit, the higher the effect, the better.

3. Focus position

The focus of the laser cutting machine can be on, and the cutting accuracy and accuracy can meet the desired requirements.

4. Cutting speed

In fact, no matter what kind of material can make the cutting speed consistent with the material, the cutting effect is better at this time. Too fast or too slow will affect the laser cutting.

5. Auxiliary gas pressure and type

The higher the pressure of the auxiliary gas, the higher the purity of the gas, the less impurities adhered to the material, and the cutting mouth becomes smoother and smoother. Generally speaking, the speed of oxygen cutting is fast, the cutting effect of nitrogen is good and the cost is low. The cutting effect will vary with different gases.