1. 280SC is designed to medium die-broad company, low investment and small consumption Especially suitable for original by hand die cutter turn to laser cutter of the professional companies and also satisfied to large packaging factories requirements.
2. High-quality 280W DC Laser is produced by GSI from U.K. The beam pattern is good, reliable and stable quality, the average life is about 10,000 hours. It can be restored power though inflate way after ends of its life. The inflate process is in GSI Suzhou factory.
3. 280SC adopted the patent-Fixed Optical to ensure guarantees the same cutting quality over the whole working area, dynamic performance, high accuracy, suitable for long-term high-intensity using
Characteristics:
Imported lasers, motors, lead screw, guide rail and other key parts to ensure product reliability;
Domestic chiller, accuracy up to ± 1 ℃.
Fixed Optical System guarantees the same cutting quality over the whole working area. (the patent)
Working area: 1250mmX2500mm;
280W DC laser (U.K. GSI), ultra-low running costs, work without any gas consumption;
High-precision ball screw transmission with Mitsubishi servo motor to ensure the accuracy of cutting;
Touched following system for cutting die-broad and automatically adapt to uneven surface of the plate to ensure the cutting results of entire table;
Upper and lower independent dual exhaust system, powerful smoke to protect the optical not to be contaminated;
Screw, guide rail and other moving parts are all smoke lobby designed to protect the machine precision;
1. 280SC is designed to medium die-broad company, low investment and small consumption Especially suitable for original by hand die cutter turn to laser cutter of the professional companies and also satisfied to large packaging factories requirements.
2. High-quality 280W DC Laser is produced by GSI from U.K. The beam pattern is good, reliable and stable quality, the average life is about 10,000 hours. It can be restored power though inflate way after ends of its life. The inflate process is in GSI Suzhou factory.
3. 280SC adopted the patent-Fixed Optical to ensure guarantees the same cutting quality over the whole working area, dynamic performance, high accuracy, suitable for long-term high-intensity using
Characteristics:
Imported lasers, motors, lead screw, guide rail and other key parts to ensure product reliability;
Domestic chiller, accuracy up to ± 1 ℃.
Fixed Optical System guarantees the same cutting quality over the whole working area. (the patent)
Working area: 1250mmX2500mm;
280W DC laser (U.K. GSI), ultra-low running costs, work without any gas consumption;
High-precision ball screw transmission with Mitsubishi servo motor to ensure the accuracy of cutting;
Touched following system for cutting die-broad and automatically adapt to uneven surface of the plate to ensure the cutting results of entire table;
Upper and lower independent dual exhaust system, powerful smoke to protect the optical not to be contaminated;
Screw, guide rail and other moving parts are all smoke lobby designed to protect the machine precision;
Model | 280SC-GSI |
Working Area | 1250mmx1250mm |
Laser Power | 280W glass laser tube (UK GSI) |
Cutting Speed | cutting speed of 18mm thickness die board 240-270mm/min (sub air: compressed air) |
Cutting Slot Width | 0.3-0.7mm |
Positioning Accuracy | ±0.05mm |
Accuracy of Shape | ±0.05mm/m |
Positioning Speed | 20m/min |
Net Weight | 1000kg |
Power Supply | 380V±10%/15A |
*Note: cutting speed has slight change. It is based on the density and moisture of die board.
Cutting speed
Materials | Cutting Sub Gas | Thickness (mm) | Cutting Speed (mm/min) |
Die board | Compressed air | 18 | 240~270 |
Electricity consumption
Items | Consumed electricity(KW/H) | Total Consumed electricity(KVA) | consumed electricity for per hour |
Laser tube | 1.5KW | 5.64KVA | 5.64° |
Machine body | 0.14KW | ||
Cooling system | 1.4KW | ||
Purge gas pump | 0.3KW | ||
Downside exhaust blower | 1.35KW | ||
Upside exhaust blower | 0.95KW |
200SC Main Configuration:
Items | Specification | Amount | Remark |
Processing travel | x-axis 1250mm/y-axis 1250mm/z-axis 60mm | One set | 200SC standard machine body |
Laser tube | 280W | One set | UK GSI |
High accuracy ball screw transmitting | Poisoning accuracy ±0.05mm | Two set | x-axis /y-axis / make-in Taiwan |
servo driving motor | Two set | x-axis /y-axis / Japan Mitsubishi | |
touched following system | one set | automatically adapt to uneven surface of the plate | |
Control panel | Air / Emergency /Test /Start /pause and other switchers | One set | Direct control of the machine body movement |
Mirror | Mirrors and focus lenses | One set | Can directly cleaned and convenient to be replaced |
Chiller | low-noise, low-cost and comprehensive monitoring function; Accuracy ± 1 ℃ | One set | China |
controlling system | Computer-off Controlling system and specialized laser controlling system software | One set | proprietary intellectual property rights |
Smoke extraction system | the upper and lower independent dual smoke extraction system | One set | Powerful exhaust |
tool attachment | Useful tools and other materials of adjusting light | One set | |
collector of cutting materials | Collector of cutting materials or drawer | One | be located in bottom of machine body |
operating instruction | One set | ||
Power line | 8m | ||
Exhaust pipe | 10m |
Equipment environment
Project | Description | Remarks |
Machine covers area | 4000mmx5000mm | Min. REF |
Machine Weights | 1000kg | |
Chiller Temperature Settings | 15-30℃ | According to the environment, temperature and humidity. |
Environment temperature | 15-28℃ | When the device is work |
Device storage temperature | >5℃ | When the device isn’t work |
Relative humidity | <60% | |
Ground requirements | Concrete floor need paint or shop terrazzo | There is not the seismic source around the areas |
Indoor requirements | Environment clean and free of dust | |
Power requirements | 380V±10%/15A | |
Computer | P4/512M/40G/WIN2000 or above | minimum configuration requirements |
Pump requirements | volume of gas:0.08m³ / Pressures:7kg/cm³ | Interface size φ6mm trachea |
Centrifugal Fan | >1000 m3/h | Interface size φ200mm duct |
Deionised water | 40L | For Chiller,Changed every 3-4 weeks |
Comparison GSI 200W with Chinese laser tube
Items | GSI280W | Chinese glass laser tube |
lifetime | 10000 hours | 2000 hours |
Refilling gas | Yes | No |
beam quality | Excellent | Normal |
Reliability | High | Normal |
Note: At present, Chinese glass laser tube less than 150W relatively has a stable laser power, lifetime for 2000 hours. Chinese laser tube 200W, 300W and 400W are all immature products and have very high fault.
Model | 280SC-GSI |
Working Area | 1250mmx1250mm |
Laser Power | 280W glass laser tube (UK GSI) |
Cutting Speed | cutting speed of 18mm thickness die board 240-270mm/min (sub air: compressed air) |
Cutting Slot Width | 0.3-0.7mm |
Positioning Accuracy | ±0.05mm |
Accuracy of Shape | ±0.05mm/m |
Positioning Speed | 20m/min |
Net Weight | 1000kg |
Power Supply | 380V±10%/15A |
*Note: cutting speed has slight change. It is based on the density and moisture of die board.
Cutting speed
Materials | Cutting Sub Gas | Thickness (mm) | Cutting Speed (mm/min) |
Die board | Compressed air | 18 | 240~270 |
Electricity consumption
Items | Consumed electricity(KW/H) | Total Consumed electricity(KVA) | consumed electricity for per hour |
Laser tube | 1.5KW | 5.64KVA | 5.64° |
Machine body | 0.14KW | ||
Cooling system | 1.4KW | ||
Purge gas pump | 0.3KW | ||
Downside exhaust blower | 1.35KW | ||
Upside exhaust blower | 0.95KW |
200SC Main Configuration:
Items | Specification | Amount | Remark |
Processing travel | x-axis 1250mm/y-axis 1250mm/z-axis 60mm | One set | 200SC standard machine body |
Laser tube | 280W | One set | UK GSI |
High accuracy ball screw transmitting | Poisoning accuracy ±0.05mm | Two set | x-axis /y-axis / make-in Taiwan |
servo driving motor | Two set | x-axis /y-axis / Japan Mitsubishi | |
touched following system | one set | automatically adapt to uneven surface of the plate | |
Control panel | Air / Emergency /Test /Start /pause and other switchers | One set | Direct control of the machine body movement |
Mirror | Mirrors and focus lenses | One set | Can directly cleaned and convenient to be replaced |
Chiller | low-noise, low-cost and comprehensive monitoring function; Accuracy ± 1 ℃ | One set | China |
controlling system | Computer-off Controlling system and specialized laser controlling system software | One set | proprietary intellectual property rights |
Smoke extraction system | the upper and lower independent dual smoke extraction system | One set | Powerful exhaust |
tool attachment | Useful tools and other materials of adjusting light | One set | |
collector of cutting materials | Collector of cutting materials or drawer | One | be located in bottom of machine body |
operating instruction | One set | ||
Power line | 8m | ||
Exhaust pipe | 10m |
Equipment environment
Project | Description | Remarks |
Machine covers area | 4000mmx5000mm | Min. REF |
Machine Weights | 1000kg | |
Chiller Temperature Settings | 15-30℃ | According to the environment, temperature and humidity. |
Environment temperature | 15-28℃ | When the device is work |
Device storage temperature | >5℃ | When the device isn’t work |
Relative humidity | <60% | |
Ground requirements | Concrete floor need paint or shop terrazzo | There is not the seismic source around the areas |
Indoor requirements | Environment clean and free of dust | |
Power requirements | 380V±10%/15A | |
Computer | P4/512M/40G/WIN2000 or above | minimum configuration requirements |
Pump requirements | volume of gas:0.08m³ / Pressures:7kg/cm³ | Interface size φ6mm trachea |
Centrifugal Fan | >1000 m3/h | Interface size φ200mm duct |
Deionised water | 40L | For Chiller,Changed every 3-4 weeks |
Comparison GSI 200W with Chinese laser tube
Items | GSI280W | Chinese glass laser tube |
lifetime | 10000 hours | 2000 hours |
Refilling gas | Yes | No |
beam quality | Excellent | Normal |
Reliability | High | Normal |
Note: At present, Chinese glass laser tube less than 150W relatively has a stable laser power, lifetime for 2000 hours. Chinese laser tube 200W, 300W and 400W are all immature products and have very high fault.
ADD: ROOM 2403 JINCHENG MANSION 511
TIANMUXI ROAD, SHANGHAI, 200070,P.R. CHIN
TEL: +86-021-63173900-101 +86-021-63173900
E-MAIL: huangwei@shanghai-upg.com