What If the Intelligent rebar straightening machine Fails?

In recent years, with the continuous development of processing machinery industry, steel bar cutting, bending, straightening and other steel bar processing machinery have significantly improved the performance and quality of equipment on the basis of traditional technology. Also, new technologies and new products are emerging.

If there is no knife out of the case in the use of intelligent rebar straightening machine, what should we do? Next, our professional after-sales staff will tell you the reason why the intelligent steel straightening machine can't produce the knife and its solutions.

Ⅰ. The reason why the intelligent rebar straightening machine does not produce the knife

The motor does not rotate or reverse; the internal drive shaft is broken; internal claw and pin failure; belt failure (not tensioned, damaged, or with grease).

Ⅱ. The solution of the intelligent steel bar straightening machine does not produce the knife

1. The motor does not rotate or reverses

If the motor of intelligent rebar straightener does not rotate, check whether the motor is damaged and whether there is a circuit problem; Reversal can replace two of the three live wires of three-phase electricity.

2. The internal drive shaft is broken, and the internal claw pin is out of order

The lubricating oil of the intelligent rebar straightening machine needs to be released, and it needs to be disassembled for inspection. If it is damaged, it can be replaced with new parts.

3. Belt failure (not tensioned, damaged, with grease)

Tighten the belt first. If it fails, try to replace with a new belt.