1.Dust removing
Before printing, the paper fibers, paper scraps and dusts will be removed to improve the printing quality and lower the rejection rate. By the way, it can stop the dusts into the printing machine to increase the service life of printing machine.
After printing, removing printing power, speeding the ink drying, separating papers and dirty in back paper can be achieved.
2.Separation of paper
After the vibration and air jetting, the pile is filled with air cushion between of the sheets, in this way, mis-feeds can be avoided.
3.Aligning
With the vibration platform and high pressure blower, the whole pile paper can be aligned at one time.
4.Static remove(optional)
Air with ionized air reduces the electrostatic charge which may affect the finishing process of coated and printed paper or plastic foil.
5.Odor Neutralizing
Very important for food packaging
6.Turning
For the piles of double-sided printing paper, the pile turning will improve the work efficiency and lower the intensity of work. The working environment will be much better for workers.
7.High efficiency easy operation
For average, the turning, powder removing, separation of paper and aligning, the processes takes about 4-5 minutes.
Everyone can handle the machine.
Model | FZ1200A |
Max.paper weight | 1500kg |
Max.paper size | 1200*800mm |
Min.paper size | 560*500mm |
Open width | Max.1920mm |
Min.920mm | |
Total power | 9kw |
Power supply | 3P 380V 50Hz |
Net weight | 3600kg |
Dimension | 2900*2090*2200mm |
Electrical Detail
Parts | Model | No. | Country | Brand |
Two-stage circuit breaker | BKN 2P D16A | 1 | Korea | LS |
Automatic air switch | GLK11-40 combination switch(40A) | 1 | ||
PLC | CP1E-N40SDT-D (Battery attached) | 1 | Japan | OMRON |
Three-stage circuit breaker | BKN 3P D16A | 2 | Korea | LS |
Three-stage circuit breaker | BKN 3P D10A | 2 | Korea | LS |
AC contactor | LC1-D1210M7C | 1 | France | Schneider |
Surge suppressors | LAD-4RCU | 1 | France | Schneider |
Thermal relay | LRD14C 7-10A | 1 | France | Schneider |
Regulated power supply | S8FS-C15024 | 1 | Japan | OMRON |
Relay | RJ2S-CL-D24 RJ2S-07L | 7 | Japan | IDEC |
Fan frequency converter | 4K00-3P4-MNA-XX 4KW | 2 | Germany | Rexroth |
Toshiba Converter | 0K40-3P4-MNA-XX 0.4KW | 2 | Germany | Rexroth |
Green button with light | XB2BW33B1C | 1 | France | Schneider |
White button | ZB2-BA1C ZB2-BZ101C | 1 | France | Schneider |
Green button | ZB2-BA3C ZB2-BZ101C | 2 | France | Schneider |
Black button | ZB2-BA2C ZB2-BZ102C | 2 | France | Schneider |
Stop button | ZB2-BS44C ZB2-BZ104C | 1 | France | Schneider |
Two selection buttons | ZB2-BD2C ZB2-BZ105C | 1 | France | Schneider |
Red light | XB2BVB4LC | 1 | France | Schneider |
Three selection buttons | ZB2-BJ5C ZB2-BZ103C | 2 | France | Schneider |
Limit switch | TZ-5104 | 2 | Taiwan | TEND |
Proximity switch | TL-Q5MC1 | 3 | Japan | OMRON |
Purchased Parts
Parts | Model | No. | Country | Brand |
High pressure air blower | RJ-629 | 2 | China | RJ |
Gearmotor | WM040-020-100SM 6P | 1 | Japan | TPG |
Vibratoring motor | DEG MVE300-3YT(0.25KW) | 1 | Italy | OLI-WOLONG |
Vibratoring motor | DEG MVE300-3YT(0.25KW) | 1 | Italy | OLI-WOLONG |
Linear Guides | BGCH45FE2L950NZ0 Ⅱ | 4 | Taiwan | STAF |
Hydraulic station | 1 | Italy | Oiltec | |
Taper joint | R3/4 change M20*1.5 | 2 | Italy | Oiltec |
Taper joint | R1/2 change M20*1.5 | 2 | Italy | Oiltec |
Taper joint | M18*1.5 change M20*1.5 | 2 | Italy | Oiltec |
Clamping hydraulic cylinder | CHSGCA63-480A | 1 | Japan | SMC |
Turn over hydraulic cylinder | CHSGCA100-552 | 1 | Japan | SMC |
Uniaxle joint | IS08139-KJ27D | 1 | Japan | SMC |
Spare Parts
Part | No. | Part | No. |
Inner hexagon spanner | 1 | Rocking handle | 1 |
Adjustable wrench | 1 | No.5 T-wrench | 1 |
Manual control button box | 1 | Backing plate | 10 |
Floor mat | 4 | Cross screwdriver | 1 |
Gradient board | 1 | Tool box | 1 |
φ50 Air duct
| 3 meters | Instructions for frequency converters | 1 |
M10*80 Expansion bolts | 10 | Instructions for using of pile turner | 1 |
0 Type Seal ring 11*1.9 | 10 | Parts book | 1 |
Combined washer 25*18*2 | 10 | Electrical schematic diagram
| 1 |
Fixed plate | 4 | Certificate before leave the factory | 1 |
Flat detonating screw M8*20 | 6 |
ADD: ROOM 2403 JINCHENG MANSION 511
TIANMUXI ROAD, SHANGHAI, 200070，P.R. CHIN
TEL: +86-021-63173900-101 +86-021-63173900
E-MAIL: huangwei@shanghai-upg.com