What Are the Key Points of Maintaining Steel Bar Cutting Machine?

1. Read the Instructions of Steel Bar Cutting Machine Carefully

As unique construction equipment, you should carefully interpret the manual before application and master the key points of operating. Never blindly access the power supply, and rashly start and debug without a purpose, so as to avoid damaging the machine. When the equipment leaves the factory, the merchant generally promises to help the customer install and debug the equipment. As consumers, it is necessary to read the instruction manual carefully.

2. Key Points of Using Steel Bar Cutting Machine

(1) Before using the machine, check whether all tools are installed reliably, and whether there are foreign bodies in various traditional systems and parts needing activities. If yes, clean it in time to avoid damaging the machine when testing.

(2) Check the clearance between the cutters. If the gap is too large, it will lead to burrs on the surface of the processed steel bar.

(3) When using steel bar cutting machine to cut steel bars, the operator should pay attention to stay away from the feeding mechanism to prevent bumping.

(4) After steel bar cutting machine finishes its work every day, it is necessary to clean tools in time. Clean up all kinds of sundries accumulated around the cutter and keep the whole cutting machine clean and tidy.

It is necessary to remind the operator that ZG-2 lubricating oil is suitable in winter, which is thin and suitable for winter use. In summer, it is best to use ZG-4 grease which is viscous and suitable for summer use.

There is no doubt that the steel bar cutting machine is an industrial equipment used to carry out fixed-length laser cutting production and processing of building steel bars in large and medium-sized engineering buildings. As a steel cutting machine manufacturer, we will introduce the process of the adjustment and installation of the steel cutting machine in detail below. We hope that customers can understand the role of the steel cutting machine in various steel processing procedures, improve work efficiency, and create greater economic benefits!

1. Before installation, check whether all the parts of the machine are complete and whether the placement position is reliable.

2. If the steel bar cutting machine is installed against a wall or in another building, leave a distance of about one meter for later maintenance.

3. A relatively wide area for raw materials and finished products should be reserved around the steel bar cutting machine.

4. The steel bar cutting machine must have an area reserved for convenient and sufficient space for stacking and transporting finished products.

5. When the steel bar cutting machine is installed, ensure that the feed is on a horizontal line during the cutting process. The blanking rack should be on the same centerline or about 5cm below the centerline. The blanking bearing frame should be close to the machine body and fixed with expansion bolts. In doing so, it will be safer without malfunctions during the operation.

Through the above introduction, everyone must be clearly aware of the debugging and installation of the steel bar cutting machine. Therefore, you can use it with ease in the future operation.